x 

ADMP401 MEMS Microphone Breakout Board

z3355_01
z3355_02
z3355_03
Fournisseurs Sparkfun
Référence:  z3355
Disponibilité du produit:   In stock
Prix ​​de vente10,00 CHF

Ready to add sound detection to your next project? This small breakout board from SparkFun couples a tiny microelectromechanical system (MEMS) microphone with a 67x gain external amplifying circuit, converting sound into analog voltage signals that can be measured by a microcontroller’s analog-to-digital converter (ADC). The unit comes fully assembled as shown and works from 1.5 to 3.3 V.
This tiny microphone board from SparkFun is a carrier for Analog Devices’ ADMP401 Omnidirectional Microphone with Bottom Port and Analog Output. Therefore, careful reading of the the ADMP401 datasheet (179k pdf) is recommended. The board includes an amplifying circuit with a gain of 67 that matches the bandwidth requirements of the ADMP401. The amplifier’s AUD output will float at one half Vcc when no sound is being picked up, and the amplifier produces a peak-to-peak output of about 200mV when the microphone is held at arms length and is being talked into at normal conversational volume levels. The convenient output voltage range of AUD means it can be directly connected to the ADC of a typical microcontroller.

The ADMP401 is a bottom port microphone, which allows the microphone to be mounted flush against the outside wall of an enclosure. The breakout board pins have a 0.1" pitch, making the board compatible with standard 0.1" protoboards, breadboards, 0.1" male headers, and 0.1" female headers.

Features

  • -3dB roll off at 100Hz and 15kHz
  • 1.5 to 3.3VDC supply voltage
  • Should comfortably output 40mW
  • Signal to noise ratio (SNR) of -62dBA

General specifications
Minimum operating voltage: 1.5 V
Maximum operating voltage: 3.3 V

File downloads
ADMP401 MEMS microphone carrier schematic (14k pdf)
ADMP401 omnidirectional microphone with bottom port datasheet (179k pdf)
ADMP401 MEMS microphone carrier PCB gerber files (9k zip)

Distributeur Suisse de

Expédition

Envoi Suisse
Suisse
Swiss shipping
 
Envoi international
terre001
International shipping

Heures d'ouverture

ZigoBot à Lausanne

La boutique est ouverte

du Mardi au Vendredi de 10h à 18h

et le Samedi de 10h à 14h.

Rue de la Grotte 4 (sous la place Saint-François) • 1003 Lausanne

Newsletter