x 

Verbal Machines VM-CLAP1 Claquement de main

z8063_01
z8063_02
z8063_03
Référence:  z8063
Disponibilité du produit:   In stock
Prix ​​de vente25,80 CHF


The Verbal Machines VM-CLAP1 Hand Clap Sensor offers a simple way to detect nearby hand claps or finger snaps without triggering from other loud ambient noises. It has a detection range of approximately 9 feet, though the actual range depends a lot on how loud the clap is.

The sensor is powered by applying 2.5 V to 5.5 V to the middle of the three pins along the short edge of the board (labeled “PWR” on the silkscreen). When a clap is detected, the open-collector OUT drives low for 40 ms and the blue LED on the board flashes. Since the output pin is open collector, an external pull-up is required to make it high by default. See the sensor’s hookup guide (79k pdf) for more information.

The power and output pins have a 0.1″ spacing and work with standard 0.1″ male and female headers, and the board features two mounting holes that work with #2 and M2 screws.

Dimensions
Size: 37 × 12 × 6.5 mm
Weight: 2.1 g

File downloads
Hookup guide for the Verbal Machines VM-CLAP1 Hand Clap Sensor (79k pdf)

Recommended links
Youtube introduction to the Verbal Machines VM-CLAP1 Hand Clap Sensor

Distributeur Suisse de

Expédition

Envoi Suisse
Suisse
Swiss shipping
 
Envoi international
terre001
International shipping

Heures d'ouverture

ZigoBot à Lausanne

La boutique est ouverte

du Mardi au Vendredi de 10h à 18h

et le Samedi de 10h à 14h.

Rue de la Grotte 4 (sous la place Saint-François) • 1003 Lausanne

Newsletter